- ClassificationCategoryCloud SecurityDomainCloud SecurityFramework FamilyFedRAMP
- Regulatory ContextTypeCertification / Assurance ProgramLegal InstrumentProgramSectorGovernment SectorIndustryGovernment & Public Sector
- Region / PublisherRegionNorth AmericaRegion DetailUnited StatesPublisherU.S. General Services Administration (GSA), FedRAMP Program Management Office; baselines approved by the FedRAMP Joint Authorization Board
- VersioningVersionRev. 5 Low baseline (156 items, approved May 29, 2023); legacy Rev5 Certification process under the Consolidated Rules for 2026Effective DateMay 29, 2023 (Rev. 5 baselines approved and released; transition plan dates followed); Consolidated Rules for 2026 in effect July 4, 2026Issue DateMay 29, 2023
- AdoptionAdoption ModelRegulatory ComplianceImplementation ComplexityMedium
- Official ReferenceOpen Link in New TabSource
License included / downloadable: Yes
The FedRAMP baselines, the legacy Security Controls Baseline workbook and the Consolidated Rules for 2026 are U.S. Government works published free on fedramp.gov; the underlying NIST SP 800-53 Rev. 5 and SP 800-53B are free from NIST.
Framework text is licensed by its publisher and is included only where stated above.
- The FedRAMP Rev. 5 Low baseline is the 156 NIST SP 800-53 Rev. 5 controls and enhancements for cloud services at FIPS 199 Low impact.
- The Joint Authorization Board approved the Rev. 5 baselines on May 29, 2023.
- It starts from the NIST SP 800-53B Low baseline of 149 controls and adds seven FedRAMP selections.
- Since July 4, 2026 the Rev5 process runs as a legacy path, with no new applications accepted after June 11, 2027.
- The LI-SaaS profile uses the same 156 items with five tailoring actions, letting a provider attest to 75 of them.
Overview
The FedRAMP Rev. 5 Low baseline is the set of 156 NIST SP 800-53 Rev. 5 controls and enhancements that a cloud service offering handling federal information at the FIPS 199 Low impact level must implement and have assessed to obtain and keep a FedRAMP Certification under the program's Rev5 process. The FedRAMP Joint Authorization Board approved the Rev. 5 baselines on May 29, 2023, and since July 4, 2026 the Rev5 process has run as a legacy path under the FedRAMP Consolidated Rules for 2026, with no new Rev5 applications accepted after June 11, 2027.
FedRAMP is the government-wide program for assessing and certifying cloud services, established within the General Services Administration by the FedRAMP Authorization Act (Pub. L. 117-263, section 5921, codified at 44 U.S.C. 3607 to 3616) and governed by OMB Memorandum M-24-15 of July 25, 2024. The Low baseline starts from the NIST SP 800-53B Low baseline of 149 controls and adds seven FedRAMP selections, for 135 base controls and 21 enhancements across 18 control families, up from 125 under Rev. 4. The program's tailored LI-SaaS profile for low-risk software-as-a-service offerings uses the same 156 items with five tailoring actions. See also the NIST SP 800-53B page.
A provider on the Rev5 path documents each of the 156 controls with the FedRAMP-defined parameters, has them tested by an independent assessor, obtains an agency sponsor or program certification and then maintains Ongoing Certification. Under the Consolidated Rules for 2026 every Rev5 provider must adopt the new rulesets by the deadlines FedRAMP has published and plan a move to FedRAMP 20x before the Rev5 process ends.
Why does it matter?
The Low baseline is the entry level of federal cloud assurance: it covers offerings where loss of confidentiality, integrity or availability would have a limited adverse effect on an agency. Its 156 items are the smallest control set that an agency authorizing official will accept under the Rev5 process, and the LI-SaaS tailoring lets a provider attest to 75 of them rather than document and test every one. The baseline matters now because its process is closing: FedRAMP stops taking new Rev5 applications on June 11, 2027, and every active Rev5 certification must follow the Consolidated Rules for 2026 or lose its certification when the grace periods expire on February 1, 2028.
Key benefits include:
- A fixed, published control set
The legacy FedRAMP Security Controls Baseline workbook lists the 156 Low items with FedRAMP-defined assignments, additional requirements and continuous monitoring periodicity for each.
- Anchored to NIST
The baseline is the SP 800-53B Low baseline plus seven FedRAMP additions, so an agency can map it straight to its own FISMA categorization.
- A lighter SaaS route
LI-SaaS tailoring applies Attest, Document and Assess, conditional, NSO and FED actions to the same 156 items, cutting the documented and assessed set for low-risk SaaS.
- One certification, many agencies
A FedRAMP Certification lets agencies reuse the assessment instead of repeating it, the program's purpose under 44 U.S.C. 3607 to 3616 and M-24-15.
- A dated transition
The Consolidated Rules for 2026 and FedRAMP 20x give Low-baseline providers published deadlines rather than an open-ended legacy status.
How does it work?
The baseline is a profile over NIST SP 800-53 Rev. 5. Each row of the Low tab in the FedRAMP Security Controls Baseline names the control or enhancement, the NIST control text and discussion, the FedRAMP-defined assignment or selection (for example AC-1(c)(1) policy review at least every three years and AC-2(j) account review at least annually at Low), any additional FedRAMP requirement and the continuous monitoring periodicity. The 156 items span 18 families, from Access Control (11 items) and Identification and Authentication (16) to Supply Chain Risk Management (11), the family NIST added in Rev. 5 and the largest single change from the Rev. 4 Low baseline of 125 controls.
The LI-SaaS variant keeps the same 156 items and assigns each a tailoring action from the workbook's key: Attest (75 items), Document and Assess (45, documented and independently assessed), Document and Assess (Conditional) (20), NSO (11, not selected because FedRAMP found no effect on the security of the SaaS) and FED (3, a federal responsibility), with two items split. The Rev. 5 Transition Plan of May 2023 placed every provider in a planning, initiation or continuous monitoring phase: a transition plan and POA&M were due by September 1, 2023, and Rev. 5 implementation by the next annual assessment or within a year of an assessment conducted between January 2 and July 3, 2023.
Under the Consolidated Rules for 2026, which took effect for widespread adoption on July 4, 2026, the Rev5 Certification Rules replace narrative guidance with declarative rules in Marketplace Listing, FedRAMP Certification, Boundary, Assurance and Package rulesets, while the Rev5 Controls remain the SP 800-53 Rev. 5 requirements. FedRAMP has renamed authorization to FedRAMP Certification, impact levels to Certification Classes A to D, the System Security Plan to the Certification Package Overview and Security Decision Record and continuous monitoring to Ongoing Certification; it no longer issues Word and Excel templates and expects packages in its JSON schemas, has removed most FedRAMP-defined organizational parameters and has replaced POA&Ms with a list of Accepted Weaknesses.
Key Elements
- Impact level
FIPS 199 Low: limited adverse effect from a loss of confidentiality, integrity or availability; agencies categorize the federal information in the offering.
- Control set
156 items: 135 base controls and 21 enhancements from NIST SP 800-53 Rev. 5 across 18 families, the SP 800-53B Low baseline plus seven FedRAMP additions.
- FedRAMP parameters
Organization-defined values fixed by FedRAMP in the baseline workbook, such as review frequencies, together with continuous monitoring periodicity for each control.
- LI-SaaS tailoring
Five actions (Attest, Document and Assess, conditional, NSO, FED) applied to the same 156 items for low-risk SaaS offerings.
- Certification process
Independent assessment of the controls, an agency or program certification, a Marketplace listing and Ongoing Certification under the Rev5 Certification Rules.
- Consolidated Rules for 2026 deadlines
January 1, 2027 for all new Rev5 applications to follow the rules; June 11, 2027 last new Rev5 application; February 1, 2028 end of grace periods; CR26 Practices expire by December 31, 2028.
What does it cover?
The baseline applies to cloud service offerings that executive agencies use to process, store or transmit federal information categorized at the FIPS 199 Low impact level, and to the providers that seek a FedRAMP Certification for them. An agency that adopts a certified service still issues its own authorization to operate and performs its own continuous monitoring under OMB Circular A-130, since a FedRAMP Certification is not a government-wide risk acceptance. Privacy controls, the PT family and Program Management controls are outside the baseline and are set by the agency. Offerings at Moderate or High impact use the larger Rev. 5 baselines of 323 and 410 items; the LI-SaaS profile serves low-risk SaaS within the Low baseline.
What are its objectives?
The Rev. 5 Low baseline carries the purposes set for FedRAMP in 44 U.S.C. 3607 to 3616 and M-24-15 into the lowest impact tier.
Give agencies a single, reusable assessment of a low-impact cloud service in place of agency-by-agency reviews.
Fix the NIST SP 800-53 Rev. 5 controls, parameters and monitoring frequencies that every Low-impact offering must meet.
Keep the control set proportionate: 156 items at Low against 323 at Moderate and 410 at High, with LI-SaaS tailoring for the lowest-risk SaaS.
Require independent assessment and Ongoing Certification so a certification reflects current security decisions.
Move providers onto the Consolidated Rules for 2026 and FedRAMP 20x by published dates.
Framework in Context
The Low baseline is the FedRAMP profile of the NIST SP 800-53B Low baseline, so it maps directly to SP 800-53B and to agency FISMA programs, and it is the floor beneath the Moderate and High baselines. Its future is set by the Consolidated Rules for 2026: FedRAMP calls Rev5 a legacy certification process being replaced entirely by FedRAMP 20x, whose Key Security Indicators replace control-by-control narratives and whose Class B certification is the 20x counterpart to Low impact. New Rev5 applications end on June 11, 2027, existing Rev5 certifications remain active until at least December 31, 2028, and all grace periods under the Consolidated Rules end on February 1, 2028.
Common Framework Mappings
Providers map the 156 Low controls to the frameworks below so that one implementation serves FedRAMP, commercial attestations and the agency's own FISMA documentation.
Mapped frameworks include:
CIS Controls v8.1
COBIT 2019
CSA CCM v4
HIPAA
ISO 27001:2022
ISO 27017
NIST CSF 2.0
NIST 800-53 Rev.5
PCI DSS 4.0.1
SOC 2
How SmartSuite Supports the FedRAMP Rev. 5 Low Baseline
SmartSuite provides the system for managing controls, evidence, mappings, assessments, and reporting.
Use Compliance Management to load the 156 Low controls with their FedRAMP parameters and monitoring periodicity, link each to its implementation record, owner and evidence, and run the assessment, Accepted Weaknesses and Ongoing Certification work from the same records, with Cyber & IT Risk holding the vulnerability and risk side.
Rev. 5 Low Control Library
Hold the 135 controls and 21 enhancements by family with the FedRAMP-defined assignments, additional requirements and continuous monitoring periodicity from the baseline workbook.
LI-SaaS Tailoring View
Tag each control with its Attest, Document and Assess, conditional, NSO or FED action so the documented and assessed subset is visible for a low-risk SaaS offering.
Implementation and Security Decision Records
Capture how each control is met, the parameter values chosen and the inherited or customer-responsibility split that feeds the Certification Package Overview and Security Decision Record.
Assessment Evidence
Attach test results and artifacts to each control for the independent assessment and the annual reassessment, with findings linked to the control they affect.
Accepted Weaknesses and Vulnerability Tracking
Track findings, remediation and accepted weaknesses in Cyber & IT Risk with owners, dates and the detection source the Consolidated Rules expect.
Ongoing Certification Calendar
Schedule the recurring activities by periodicity, assign owners and report coverage, overdue items and open weaknesses on dashboards for agency reviews.
Related frameworks

CIS Controls v8.1 is a prioritized set of 18 Controls and 153 Safeguards, in three Implementation Groups, with a new Govern function.

ISO/IEC 27001:2022 specifies requirements for an information security management system: Clauses 4 to 10, risk treatment, the Statement of Applicability and 93 Annex A controls.

ISO/IEC 27002:2022 is the reference set of 93 information security controls in four themes, with attributes and implementation guidance, that supports an ISO/IEC 27001 ISMS.

ISO/IEC 27017:2026 gives cloud security control guidance for customers and providers, built on ISO/IEC 27002:2022, with four cloud-specific controls; it replaced the 2015 edition.

ISO/IEC 27018:2025 gives guidelines for protecting PII in public clouds acting as PII processors, built on ISO/IEC 27002:2022 with an extended control set.

NIST CSF 2.0 (CSWP 29, February 26, 2024) is the voluntary cybersecurity framework with six Functions including Govern, 22 Categories, 106 Subcategories, Profiles and Tiers.
Frequently Asked Questions For U.S. FedRAMP Rev. 5 (Low Impact Baseline)
156 items: 135 base controls and 21 control enhancements from NIST SP 800-53 Rev. 5 across 18 control families, as listed on the Low tab of the FedRAMP Security Controls Baseline workbook. FedRAMP started from the SP 800-53B Low baseline of 149 controls and added seven; the Rev. 4 Low baseline had 125.
LI-SaaS (Low Impact Software-as-a-Service) is a tailoring of the same 156 Low items, not a separate control set. Each item carries one of five actions from the workbook's key: Attest (75), Document and Assess (45), Document and Assess (Conditional) (20), NSO, not selected (11) and FED, a federal responsibility (3), with two items split. Only the Document and Assess items are independently tested.
For now. Under the Consolidated Rules for 2026, all new Rev5 applications must follow the rules from January 1, 2027, and FedRAMP will accept no new applications for Rev5 Certification after June 11, 2027. FedRAMP describes Rev5 as a legacy certification process being replaced entirely by FedRAMP 20x, so a provider starting today should weigh 20x Class B, the 20x counterpart to Low impact.
The rules took effect for widespread adoption on July 4, 2026. They rename FedRAMP authorization to FedRAMP Certification, impact levels to Certification Classes A to D, the System Security Plan to the Certification Package Overview and Security Decision Record and continuous monitoring to Ongoing Certification; they replace Word and Excel templates with JSON packages, remove most FedRAMP-defined organizational parameters and replace POA&Ms with a list of Accepted Weaknesses. Grace periods end on February 1, 2028.
The FedRAMP Authorization Act, section 5921 of Pub. L. 117-263 (codified at 44 U.S.C. 3607 to 3616), established FedRAMP in law within the General Services Administration, and OMB Memorandum M-24-15 of July 25, 2024 set the program's current policy, rescinding the Federal CIO's 2011 memorandum. The controls themselves come from NIST SP 800-53 Rev. 5 and the SP 800-53B Low baseline.

Put this framework to work in SmartSuite
Manage controls, risks, evidence, and audits in one platform designed for modern governance, risk, and compliance.


